×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

DHCP Manual Bindings

Unanswered Question
Oct 7th, 2002
User Badges:

Has anyone tried to configure manual bindings on th DHCP server on their Router? I tried but is still given the dynamic address. Anyone has any clue on how to make it work?


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
0r-lau Mon, 10/07/2002 - 19:22
User Badges:

Hi Zach,


I've tried it but still couldn't to get it to work.


here's my config.


ip dhcp pool Ron

host 192.168.0.10 255.255.255.0

hardware-address 0100.000e.210c.42

client-name ron

netbios-name-server 192.168.0.251

default-router 192.168.0.1

dns-server 165.21.83.88


Can you see anything I've missed out?


Thanks.



seilsz Tue, 10/08/2002 - 04:32
User Badges:
  • Bronze, 100 points or more

Ron,


What type of client (OS) is requesting the address?


-Zach

ddemers Tue, 10/08/2002 - 04:37
User Badges:

Looks like you're missing the 'network' command. Try this:

ip dhcp pool POOLa

network 192.168.10.0 255.255.255.0

netbios-name-server 192.168.0.251

default-router 192.168.0.1

dns-server 165.21.83.88

netbios-node-type p-node

ip dhcp pool Ron

host 192.168.0.10 255.255.255.0

client-name ron

client-identifier 0100.000e.210c.42


seilsz Tue, 10/08/2002 - 04:42
User Badges:
  • Bronze, 100 points or more

... and you need to change 'hardware-address" to "client-identifier" if this is a Microsoft client.


-Zach

0r-lau Tue, 10/08/2002 - 16:18
User Badges:

That did the trick! Thanks.


Does that mean I can only use "client-identifier" for Microsoft clients only and "hardware-address" for other clients?

0r-lau Tue, 10/08/2002 - 16:19
User Badges:

Hi,


I do have the "network" command, but just didn't post it.


But have managed to get it up and running. Thanks for the help.

Actions

This Discussion