I Have a problem whit NM-4T1-IMA and E1. don't input output packets.
Send configuration:
help please.
IOS. Version 12.2(12)
vc-class atm adsl-A
vbr-nrt 256 256 32
interface ATM5/0
no ip proxy-arp
atm vc-per-vp 256
no atm ilmi-keepalive
no atm address-registration
no atm ilmi-enable
no scrambling-payload
impedance 120-ohm
interface ATM5/0.10 point-to-point
no ip unreachables
no ip proxy-arp
pvc 65/32
class-vc adsl-A
encapsulation aal5mux ppp dialer
dialer pool-member 10
interface Dialer10
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
dialer pool 10
peer default ip address pool dialin_pool
compress stac
no cdp enable
ppp authentication pap chap callin
ppp ipcp dns 195.219.118.16
!
ip local pool dialin_pool 213.45.54.33 213.45.54.40
CLIENT ADSL: CISCO 827 IOS: 12.1
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname LOST
!
logging rate-limit console 10 except errors
enable password gdfgfdgdfg
!
mmi polling-interval 60
mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip finger
ip name-server 213.45.3.4
ip name-server 123.43.22.1
!
no ip dhcp-client network-discovery
!
!
!
!
!
interface Ethernet0
ip address 172.30.1.100 255.255.255.0
ip nat inside
no ip mroute-cache
hold-queue 32 in
!
interface ATM0
no ip address
ip nat outside
no ip mroute-cache
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 1/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname rert
ppp chap password 32323jj32jj3j
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
ip nat inside source list 100 interface Dialer0 overload
access-list 100 permit ip 172.30.1.0 0.0.0.255 any
dialer-list 1 protocol ip permit