Solved: Baystack 450-24T Catalyst 3548

jvignault · ‎10-25-2002

How can I get a connection via Gbic between these differents switches. Both switches are not using Vlan but are use like a hub.

Which config should I enter into both catalyst. (full duplex, negociation...)

MARIO PAIVA · ‎10-25-2002

Should not put autonegotiate in both sws and no full duplex. Set same speed in both.

MP

View solution in original post

MARIO PAIVA · ‎10-25-2002

No the gbic on the c3548 isn't 100/1000, it is only 1000 Mbps. So you never will be able to connect the bs450 to the C3524, if you not buy an gbic 1000 Mbps to the bs450.

MP

View solution in original post

MARIO PAIVA · ‎10-25-2002

Should not put autonegotiate in both sws and no full duplex. Set same speed in both.

MP

jvignault · ‎10-25-2002

I've tried but it still doesn't work. Is there something else to add into the c3548 ?

jvignault · ‎10-25-2002

Ont the Baystack the line is up but not on the catalyst. The speed on the c3548 is 1000 and 100 on the baystack.

How can I change the speed on the c3548 ?

MARIO PAIVA · ‎10-25-2002

No the gbic on the c3548 isn't 100/1000, it is only 1000 Mbps. So you never will be able to connect the bs450 to the C3524, if you not buy an gbic 1000 Mbps to the bs450.

MP