Full Duplex on an Ethernet 10 Mbps in a 3620 Router

Unanswered Question
steve.barlow Mon, 11/04/2002 - 08:53
User Badges:
  • Silver, 250 points or more

Try:

Router(config)# interface fastethernet 0

Router(config-if)# duplex full


Hope it works. If it doesn't but it gives you an error like:

% interface does not support full-duplex.


Then it is a hardware, not IOS, limitation you have. It requires fast ethernet.

Hope it helps.

Steve



Actions

This Discussion