×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
donewald Fri, 11/29/2002 - 16:18
User Badges:
  • Silver, 250 points or more

To answer this you'd need to know how many prefixes you will be getting from each neighbor or a total number of routes you will have in your 7600, will you be using communities, route-reflection, dampening, # of alternate paths, would you use max-path information, etc.


For example:


With no communities, route-refection, dampening, with a 100K routes you would need 26000468 bytes of memory just for BGP.


400 neighbors seems quite a lot. Is there not a reason that an IGP would work out for your solution?


Hope this helps,

Don

r-hermoni Sat, 11/30/2002 - 23:19
User Badges:

Hi Don ,

thanks for your answer.

IGP is not in the scope of this solution.

the numbers that you gave me was helped.

thanks again.


roi


riverhead ltd.

Actions

This Discussion