×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

LANE: ELAN Number

Answered Question
Dec 9th, 2002
User Badges:

Hi,


can I use a ELAN-number above 255 for LANE?


Regards.


Volker

Correct Answer by donewald about 14 years 8 months ago

Volker,


Assuming you mean on your sub-interfaces to identify the elan here. No, you cannot. The selector byte is used to identify this and it is only a 1 byte field so you cannot use decimal numbers higher than 255.


Hope this helps,

Don

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
donewald Mon, 12/09/2002 - 07:25
User Badges:
  • Silver, 250 points or more

Volker,


Assuming you mean on your sub-interfaces to identify the elan here. No, you cannot. The selector byte is used to identify this and it is only a 1 byte field so you cannot use decimal numbers higher than 255.


Hope this helps,

Don

Actions

This Discussion