×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

MSTAT Output

Unanswered Question
Dec 16th, 2002
User Badges:

I have the following MSTAT output. Looking at the -2391/0 = --% statistic, is this indicative of an error? Does anyone have an explanation of it?


mstat 10.65.53.10 10.65.63.114 239.195.0.8

Type escape sequence to abort.

Mtrace from 10.65.53.10 to 10.65.63.114 via group 239.195.0.8

From source (nhq1--coap01brd.amfam.com) to destination (desperado.amfam.com)

Waiting to accumulate statistics......

Results after 10 seconds:


Source Response Dest Packet Statistics For Only For Traffic

10.65.53.10 10.255.21.57 All Multicast Traffic From 10.65.53.10

| __/ rtt 3 ms Lost/Sent = Pct Rate To 239.195.0.8

v / hop 3 ms --------------------- --------------------

10.65.53.2

10.255.21.249 nhq-epms-sn-2-4-1.amfam.com

| ^ ttl 0

v | hop -1 ms -3/0 = --% 0 pps 0/0 = --% 0 pps

10.255.21.250

10.255.21.58 nhq-core2-3-5.amfam.com

| ^ ttl 1

v | hop 0 ms -2391/0 = --% 0 pps 0/0 = --% 0 pps

10.255.21.57

10.65.63.3 nhq-b-o-v162.amfam.com

| \__ ttl 2

v \ hop 0 ms 2395 239 pps 0 0 pps

10.65.63.114 10.255.21.57

Receiver Query Source



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bhalim Thu, 01/09/2003 - 11:59
User Badges:

I looked at the suggested link but I couldn't find any detailed info to line by line of the mstat output. Can anyone direct or explain what each line means? thanks.

Actions

This Discussion