×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 3662 Performance Issue

Unanswered Question
Jan 5th, 2003
User Badges:

Is there any performance issue if I have Cisco 3662 with:


1 (one ) NM-2CE1B --> 2-Port Channelized E1/ISDN-PRI Balanced Network Module

3 (three) NM-4T --> 4-Port Serial Network Modules

2 (two) NM-30DM --> 30 Port Digital Modem Network Modules


I heard that Cisco 3660 is not capable of handling 60 concurrent dial-in users and several serial connections simultaneously.


Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tepatel Tue, 01/07/2003 - 11:08
User Badges:
  • Cisco Employee,

YES..I think 3660 will be able to handle that without a problem as i can see on the following doc that 3640 will be fine with 3 modules of NM-4T

http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/3600_ov.htm

The NM-4T serial network module has four synchronous serial interfaces. The network module supports a total full-duplex throughput of 8 megabits per second (Mbps), which can be realized over one port (at 8 Mbps) or across all four ports (at 2 Mbps on each port).



Actions

This Discussion