01-05-2003 06:15 PM - edited 03-02-2019 03:56 AM
Is there any performance issue if I have Cisco 3662 with:
1 (one ) NM-2CE1B --> 2-Port Channelized E1/ISDN-PRI Balanced Network Module
3 (three) NM-4T --> 4-Port Serial Network Modules
2 (two) NM-30DM --> 30 Port Digital Modem Network Modules
I heard that Cisco 3660 is not capable of handling 60 concurrent dial-in users and several serial connections simultaneously.
Thanks.
01-05-2003 08:05 PM
.
01-07-2003 11:08 AM
YES..I think 3660 will be able to handle that without a problem as i can see on the following doc that 3640 will be fine with 3 modules of NM-4T
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/3600_ov.htm
The NM-4T serial network module has four synchronous serial interfaces. The network module supports a total full-duplex throughput of 8 megabits per second (Mbps), which can be realized over one port (at 8 Mbps) or across all four ports (at 2 Mbps on each port).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide