Voice Gateway for Small Site

Unanswered Question
Jan 23rd, 2003
User Badges:

For an office of 10 people what would be the best Voice gateway to use?

Also what would be the best PSTN connection? A Partial PRI ?

Currently this office has 8 analog copper trunks coming into a small pbx.

With that many copper trunks I don’t think FXO cards will work…

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jeff Garner Thu, 01/23/2003 - 09:09
User Badges:

Ok the users are saying 8 is not enough... They are wanting all 10 people to be able to dial out at one time... If that is the case what are we looking at...


electro22 Thu, 01/23/2003 - 09:19
User Badges:

well you could go two ways.


1) (not so good ) you could use the 2600 solution and then purchase a VG200 with some FXO ports.


2) (better option) Use the 2600 and get the NM-HDV-T1 module. This module will take in a T1 and you could do a fractional T1 if its cost effective for your situation (otherwise just purchase a full T1).


-Jaret

Actions

This Discussion