×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Hardware Replacement as part of 3.15 to 4.0 upgrade

Unanswered Question

We're upgrading our Unity 3.1.5 server to 4.0 this week (or hoping to :-) and during that process would also like to replace our existing aging Dell PowerEdge 2400 server with a newer Dell PowerEdge 2600 server.


Questions:

1. We had thought the best approach for this might be to upgrade 3.1.5 to 4.0 in place on the existing server - then do a server-to-server migration to 4.0. Is this a good idea? If not what would be a better approach? If it is a good idea - could someone point me to the docs on how to change hardware (I assume DIRT is involved but would guess there are some designed-out steps pre-compiled somewhere so I don't get myself in trouble - it is an Integrated messaging system with Exchange 2000 off-box.


2. I am presuming in all this the 2600 is qualified for Unity - but could someone point me to the qualification page so I can check for sure?


Thanks!


Ken Johnson

Mgr. Network Services

LeTourneau University

http://www.letu.edu

"Faith brings us together. Ingenuity sets us apart."

-------------------------------------------------------------------------

CIPTUG

Cisco IP Telephony Users Group

http://www.ciptug.org

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion