×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cannot retrieve config file from Catalyst 5000 series

Unanswered Question

I use RME 3.4 on Solaris 7. RME Configuration Archive cannot get the (running) config files from Cat 5000-devices (supervisors) into the archive.

Using TFTP, it states 'Invalid TFTPBoot Directory' and nothing happens. I know this is a bug in Bug Tracking with status 'New', and in the online help it says that TFTP is (only?) used for IOS 12.0 and above. So, RME should try Telnet, but it doesn't. It also should try SSH, but this doesn't happen either. I tried reversing the order TFTP-Telnet-SSH, but to no avail.

The Telnet and enable passwords are correct and also the SNMP strings are correct. I can do a TFTP and Telnet transport by hand. All other device types work fine. Any suggestions!??

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion