×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

3500 bug?

Answered Question
Feb 10th, 2003
User Badges:

why I can't "no int loop 25" and there are so many int loop 25?

are there any bug? IOS version is 12.1(9)EA1c.

3500#sh run

interface Loopback25

ip address 9.9.9.1 255.255.255.0

!

interface Loopback25

no ip address

shutdown

!

interface Loopback25

no ip address

!

3500#conf t

Enter configuration commands, one per line. End with CNTL/Z.

3500(config)#no interface Loopback25

^

% Invalid input detected at '^' marker.


3500(config)#


any comment is appreciated!

Correct Answer by Prashanth Krishnappa about 14 years 6 months ago

What you are seeing is similar to the following bug

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdx29360


12.1(11)EA1 and later versions have a fix for it

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.

Actions

This Discussion