Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

3 Site Bridged 350 Network

Unanswered Question
Feb 16th, 2003
User Badges:

Do you have to have the two remotes on the same channel as the Central bridge?

Is there a detailed Sample config somewhere for Central Bridge to two remotes?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
derwin Sun, 02/16/2003 - 18:23
User Badges:
  • Cisco Employee,

Hi Bob,

It is the Root that decides the radio channel.

As for sample configs every network is different so sample configs dont really work here

You simply need

All Bridges with the same SSID

One Bridge set to Root on this same bridge set the radio channel

the other 2 bridges set to Non root without clients (if you want radio clients to associate to the remote ends like an AP then set it to non root with clients)

After that then the configs are what ever features you want to use like WEP 802.1x/LEAP TKIP MIC etc but these configs will be pretty much the same on all 3.

Here is a link to the configuration guide for the bridge I am sure it will answer your questions



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode