×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

2 AP 350 connected to a Catalyst 2950 at the same VLAN...

Unanswered Question
Mar 17th, 2003
User Badges:

I have two AP 350 connected to a Catalyst 2950 at VLAN 3.

This is the problem... if one user is working with his notebook (connected to AP 1) and starts walking to the other office so AP 2 would have to take control of the connection... how does Catalyst stop sending traffic to port fa 0/1 and starts sending traffic to port 0/2 where the AP 2 is connected???

Do I do myself clear???


I think it could be a good idea to set the mac address-table aging-time to 0 for VLAN 3. So VLAN would start working as a hub, sending traffic to all its ports.

But in practice this could not be done.


I am working with two AP 350, Catalyst 2950 and IOS 12.1(13)EA1


I really need your help!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dave.reid Mon, 03/24/2003 - 05:28
User Badges:

I don't know where it's documented (nor did I look), but my understanding is that when a client associates to a Cisco AP, the AP will generate a broadcast using the client MAC address, thus populating MAC forwarding tables in the switches.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode