×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

router access each other

Unanswered Question
Mar 24th, 2003
User Badges:

I want to connect two router by two modem.Modem is connect to serial/async port of router.If they haven't line ,for example isdn,frame-relay ,can they access each other by dialin telephone number?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a.manosca Tue, 03/25/2003 - 00:32
User Badges:
  • Bronze, 100 points or more

Using synchronous communication with the two modems (modem-1 and modem-2), you simply cross-connect them by connecting modem-1's TX

to modem-2's RX and vice versa.


If your modem supports SYNC dial, you can just connect a local line to each modem and then dial the number of the line connected to one of the modems.

You can use the default HDLC encap on the router and configure addresses.


Actions

This Discussion