×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Deny Inbound (No xlate) src outside dst outside

Unanswered Question
Mar 27th, 2003
User Badges:


All,

My problem is the routing on the same interface (outside) in the PIX Firewall.

The solution that i've though is the command static (outside, outside) but unfortunately it didn't work,i've experienced the same on the inside interface with the command static (inside, inside) and it worked.

Does anyone a suggestion about?


Thanks in advance



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tvanginneken Thu, 03/27/2003 - 08:14
User Badges:
  • Silver, 250 points or more

The PIX does not route packets that arrive on a certain interface and go out again on that same interface. Only packets that go 'through' the PIX are routed (eg from inside to dmz, for inside to outside, for dmz to outside,....)


Kind Regards,

Tom

Actions

This Discussion