03-31-2003 05:30 PM - edited 03-02-2019 06:17 AM
Hi all,
When use port-security in the switch, we use switchport port-security mac-address x.x.x to config the port, but what's the difference with the "switchport port-security violation shutdown" command? Thank You!
Best Regards
Teru Lei
Solved! Go to Solution.
03-31-2003 07:06 PM
shutdownWhen a port security violation occurs, the interface is error-disabled and the port LED is off. When a secure port is in the error-disabled state, you can bring it out of this state by entering the errdisable recovery cause psecure-violation global configuration command, or you can manually re-enable it by entering the shutdown and no shutdown interface configuration commands. This is the default mode.
Nilesh
03-31-2003 07:06 PM
shutdownWhen a port security violation occurs, the interface is error-disabled and the port LED is off. When a secure port is in the error-disabled state, you can bring it out of this state by entering the errdisable recovery cause psecure-violation global configuration command, or you can manually re-enable it by entering the shutdown and no shutdown interface configuration commands. This is the default mode.
Nilesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide