CW2K not archiving all configs

Unanswered Question
Apr 3rd, 2003
User Badges:

I am getting the following when I go into Config management on RME. I try to pull up a config on a device.

PGM_NM=Configuration Archive:6219:TYPE-unassigned message type::Error creating the configlets for /var/adm/CSCOpx/archive/config/523/20030228000607running.cfg file Cat

Probable Cause

PGM_NM=Configuration Archive:6220;Type=unassigned message type::The file is not a valid file.

Recommended Action

Specify a fully qualified file name.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
thomas.chen Wed, 04/09/2003 - 11:17
User Badges:
  • Silver, 250 points or more

Be sure that you are stopping and starting the CiscoWorks daemons after making the changes to your archive directory

(/etc/init.d/dmgtd stop,followed by /etc/init.d/dmgtd start)

If you have done this, you can turn on debugging to find out what's going on when you're doing the Config Archive

To do so,edit the following file


and set DEBUG_LEVEL to 5.

Then stop and start the Ciscoworks daemons (as per above) and try a report, you will want to look through the following logs:




This Discussion