cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1574
Views
0
Helpful
4
Replies

Interface ethernet0 auto Shutdown

farhan
Level 1
Level 1

Hi,

I have this ethernet0 interface shutdown. How do I say no shut for it?

Thanks for your help

4 Replies 4

tcross3
Level 1
Level 1

type;

interface ethernet0 auto

or

interface ethernet0 100full

jmia
Level 7
Level 7

Try - no shut down interface e0

Rem - need to be in config mode on e0.

Jay

rajesh_rsinghai
Level 1
Level 1

router#int e0

(router-config)#Ip address *.*.*.* *.*.*.*

(router-config)#no shutdown

Rajesh Jain

navinquadros
Level 1
Level 1

Hello Farhan,

This seems to be a generic problem. If I understand your problem correctly, you have a Ethernet port that is currently shutdown.

If this is correct, go ahead as follows:

1. Login to the router using a console cable [If that is the only ethernet port then you won't be able to telnet to it :-) ]. Get to privileged mode.

2. Type at prompt the following sequence:

a) config terminal

b) interface e0

c) ip address ***.***.***.***

# This step only if you have not configured the ip address for this port

d) no shutdown

e) exit

# exit out of config mode

f) copy running-config startup-config

# This command if you do not want to repeat this procedure the next time the router is restarted :)

g) exit

Tell me if this solves your problem and if you have any other queries

Have a nice day,

Navin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: