is there an IOS version for DSLAM 6130/6160 with support for LDP?

m.iancu · ‎04-14-2003

I'm trying mpls features on DSLAM boxes and it seems like it works using TDP.

All the release notes I was able to find on web site say LDP is not supported.

What do you guys know about this?

Thank you,

Mihai

tepatel · ‎04-14-2003

Cisco TDP and LDP are nearly identical in function, but use incompatible message formats and some different procedures. Cisco now implements a standards-compliant LDP.

Here is the url which confirms that for DSLAMS

http://www.cisco.com/univercd/cc/td/doc/product/dsl_prod/ios_dsl/rel122/config/04conf06.htm

m.iancu · ‎04-15-2003

hello,

thank you for your answer - i got a little bit scared because of the "711" :)

also i was not able to find any commands for ldp ...

dslam01-test.40nr#sh tag-switching tdp neighbor

Peer TDP Ident: 172.16.1.7:1; Local TDP Ident 172.16.1.6:3

TCP connection: 172.16.1.7.11001 - 172.16.1.6.711

State: Oper; PIEs sent/rcvd: 1367/1363; ; Downstream on demand

Up time: 19:45:42

TDP discovery sources:

ATM0/2.67, Src IP addr: 172.16.1.7

dslam01-test.40nr#

dslam01-test.40nr#sh mpls ldp ?

% Unrecognized command

dslam01-test.40nr#sh mpls ldp