×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

1760V Fax Relay / Pass-through Support?

Unanswered Question
Apr 15th, 2003
User Badges:

http://www.cisco.com/warp/public/788/AVVID/avvid_fax_support.html


It says that this gateway doesn't support fax relay or pass-through faxing.


I was looking at deploying 1760V's with PRI's to offices, and ATA's on the fax machine.


Ok. If the matrix says it does not support fax pass-through... then will the 1760V not support "pass-through" to the ATA on the fax machine?

-Jason

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dgoodwin Fri, 04/18/2003 - 21:16
User Badges:
  • Cisco Employee,

Hi Jason,


Using 12.2(11)YU software on the 1760, Fax passthrough (required when using ATA18x) is supported. You'll have to use H.323 to talk to the 1760, unless the CallManager is running 3.3.

Actions

This Discussion