×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Linksys BEFVP41 to PIX 515 VPN - can ping but all else fails...

Unanswered Question

I've got a successful tunnel running, sort of. I can ping workstations on either side just fine. From the PIX side I can ping the internal LAN port on the Linksys but from the Linksys side, I can't ping the internal port of the PIX, only the external port. From the PIX itself I can't ping diddly on the Linksys side.


All attempts to view pages on the Intranet server behind the PIX fail, as does connectivity to servers for other applications. Found 1 post regarding this and it talked about setting the MTU lower to allow for the overhead of the 56 bytes for the IPSEC header, other than that I can't find anything that is similar.


Anyone run into this before? Let me re-phrase that, anybody run into this before and solve it?


Thanks in advance!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
owillins Mon, 04/21/2003 - 11:52
User Badges:
  • Silver, 250 points or more

The sysopt connection permit-ipsec command allows inbound vpn traffic to bypass the translation table. Guess you would need to add this command on the PIX.

You could do a debug and check if the users behind the Linksys are able to ping the servers behind the PIX to confirm this.

Hope this helps.


Actions

This Discussion