×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Can't connect with anything later than VPN client 3.51???

Answered Question
Apr 25th, 2003
User Badges:
  • Bronze, 100 points or more

Can anyone tell me why the VPN client v3.5 works OK when I connect to our PIX (v6.31) but any later versions, including 3.6, 3.7 & 4.0 refuse to work and I receive the "peer not responding" error.

The password, group name and IP address are correct!


If I downgrade to 3.5 everything works again!!


Any help greatly appreciated.


Andy

Correct Answer by pdentico about 14 years 4 months ago

More than likely your isakmp policy is set to sha. Change it to md5 or add another with md5, and you should be ok.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
pdentico Fri, 04/25/2003 - 12:01
User Badges:

More than likely your isakmp policy is set to sha. Change it to md5 or add another with md5, and you should be ok.

Anonymous (not verified) Fri, 04/25/2003 - 12:53
User Badges:

Sorted - I've just found it in an earlier post and everything is hunky dory now.


Thanks anyway.


Appreciated ;o)

Actions

This Discussion