×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Pix firewall 506 - static (inside outside) problem

Unanswered Question
May 4th, 2003
User Badges:

Hello,

i am connected the server behand the firewall..

firewall ip address -outside - 64.170.x.1 inside -192.168.1.1

IIS server A -ip address inside -192.168.1.2 outside - 64.170.x.2

above server working fine and also i have

IIS server B ip address -64.170.x.3 which is not behand firewall.and also its working fine. now i shifted this server behand the firewall

i given inside 192.168.1.3 outside 64.170.x.3 - now from out side we cannot access the server all configuration is same as above server.

is it happening b'cause of before this ip address is outside the firewall?

i clear the arp also but not working.any help


Thanks

Sunil Kolkur


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bdube Sun, 05/04/2003 - 05:02
User Badges:

Did you change the default gateway of your IIS server B to point to the firewall's internal interface ?


Ben


sunilbk Mon, 05/05/2003 - 07:35
User Badges:

yes i did change the default gateway of iis server B,same problem

server cannot access outside firewall...and from outside we cannot access that server..any help

Actions

This Discussion