WLSE and AP1100 (IOS)

Unanswered Question
May 8th, 2003
User Badges:

I am having trouble getting the wlse to auto-discover an ap1100. I have followed the steps(at least think I have)necessary to get a ap that runs VxWorks to be discoverd

1. CDP enabled

2. SNMP RO and RW , that is also in the discovery credentials on the WLSE

3. User account has been setup - with RW priviledge

4. TFTP is not an option unless upgrading the device via web browser (real-time).

I have checked the switch that is the ap physically connects to. It has different snmp strings, but those are also entered into the wlse. There is an access-list that only permits certain ip addresses that snmp query the switch. The wlse ip address is permitted in this access list. Does anybody have any ideas. I have reviewed the WLSE User guide, but did not see specifics on the IOS based AP's. My wlse is running 1.3.1u

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion



Trending Topics - Security & Network