Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Router to router VPN

Unanswered Question
May 13th, 2003
User Badges:

Hi Guys.

we are having one location in USA and one in India.We are taking a data link between these two lines and want to set up VPN Between the two.

i m having 7206 Router and also 2621 router at both the sites.Can i use router to router VPN.Means can i use VPN Between these two router.

Please explain in detail,ny document that explains will be very helpful



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
dinesh_ymca Wed, 05/14/2003 - 11:01
User Badges:

thx a lot.

one more doubt.I m using the same two 7206 routers between the two sites for IPLC `s which asre forwarding my voice traffci between the two locations.I want to use the same 7206 VXR Routers at the two locations for VPN.

If i donot use any hardware module.Is it going to cause abny issues.

And what IOS version should i have on my routers.



jfrahim Wed, 05/14/2003 - 13:11
User Badges:
  • Cisco Employee,

Hi there,

Voice traffic is time sensitive. Having a router without an encryption module would add considerable delay when the packet gets encrypted. I guess, it really depends on you how much delay you can tolerate. You can look at the V3PN design guide for different scenarios and IOS recommendation etc



dinesh_ymca Wed, 05/14/2003 - 16:54
User Badges:


now senario is a lot more clear to me.

one last query.

i m using c7200-is-mz.122-10 and c7200-kboot-mz.122-12b.bin

and crypto commands are not working on my router.


crypto isakmp policy 1

should i need to upgrade my router IOS.i also tried to find out using cisco software adviser but could not find any satisfactory answer.

Please tell what to do.




This Discussion