VPN Spoke to Spoke Routing

Unanswered Question
May 16th, 2003
User Badges:

Hi!

We are setting a hub (Point A) to spoke (Points B, C and D) VPN


The Hub is a Cisco 1760 with static public address

The spokes are Cisco 827H routers with DYNAMIC public address


We have no problem establishing the tunnels between the spokes and the hub, the problem is that the spokes don't talk to each other.



We can't define static routes at the hub because the spokes have dynamic addresses



We think that the solution is to use DMVPN and NHRP but apparently this features are not supported on the CIsco 827 routers.


Any suggestion ??

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jbohla Thu, 05/22/2003 - 12:48
User Badges:

I think the only option is going for a change of router in the braches.


Actions

This Discussion