cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
238
Views
0
Helpful
1
Replies

VPN Spoke to Spoke Routing

alberto.haro
Level 1
Level 1

Hi!

We are setting a hub (Point A) to spoke (Points B, C and D) VPN

The Hub is a Cisco 1760 with static public address

The spokes are Cisco 827H routers with DYNAMIC public address

We have no problem establishing the tunnels between the spokes and the hub, the problem is that the spokes don't talk to each other.

We can't define static routes at the hub because the spokes have dynamic addresses

We think that the solution is to use DMVPN and NHRP but apparently this features are not supported on the CIsco 827 routers.

Any suggestion ??

1 Reply 1

jbohla
Level 1
Level 1

I think the only option is going for a change of router in the braches.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: