05-21-2003 07:13 PM - edited 03-09-2019 03:22 AM
internet user and inside can't access webserver on the DMZ! why???
The follow is configration list!
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 dmz security50
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list acl_out permit tcp any host 61.53.x.x eq www
access-list acl_out permit icmp any any
access-group acl_out in interface outside
pager lines 24
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto
mtu outside 1500
mtu inside 1500
mtu dmz 1500
ip address outside 61.53.x.x 255.255.255.248
ip address inside 192.168.0.1 255.255.255.0
ip address dmz 10.100.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
failover ip address outside 0.0.0.0
failover ip address inside 0.0.0.0
failover ip address dmz 0.0.0.0
pdm history enable
arp timeout 14400
global (outside) 1 61.53.x.x netmask 255.255.255.248
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (dmz,outside) 61.53.x.x 10.100.0.2 netmask 255.255.255.255 0 0
route outside 0.0.0.0 0.0.0.0 61.53.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet timeout 5
ssh timeout 5
terminal width 80
Cryptochecksum:8cb8e140233a5b2128220f25bcbb8dcb
: end
[OK]
05-21-2003 08:07 PM
Hi:
Apply your ACL to the DMZ:
access-group acl_out in interface DMZ
This should work...please give a feedback..
best regards / Sampath.
05-21-2003 08:43 PM
however! can't access webserver! I'm morose!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: