×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to configure a span port on switch 3524 with two vlans

Unanswered Question
Jun 5th, 2003
User Badges:

I am trying to configure span port on 3524 which has two vlans

how should i do that , i need to different span port for diferent vlans or one span port for two vlans.



Thanks




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jasonrakers Thu, 06/05/2003 - 09:31
User Badges:

I think the 3500s can only have one span session active at a time. To create a span session on your 3524, enter the interface desired for the destination (where the sniffer is attached) and do a "port monitor ". can be a physical interface or a whole VLAN. You can only do one source VLAN at a time.


Hope this helps.


t.baranski Thu, 06/05/2003 - 18:02
User Badges:
  • Bronze, 100 points or more

Per http://www.cisco.com/en/US/products/hw/switches/ps637/products_configuration_guide_chapter09186a00800d9d3d.html#xtocid25 :


"A SPAN port cannot monitor ports in a different VLAN, and a SPAN port must be a static-access port. You can define any number of ports as SPAN ports, and any combination of ports can be monitored."


So it appears that 3500s can have multiple SPAN ports simutaneously.

Actions

This Discussion