×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

why my pix535 only support 3 static outside ?

Unanswered Question
Jun 6th, 2003
User Badges:

On the other side of pix 535 outside interface ,the router`s interface ethernet

,with the "show arp "command,i only find three pix 535 static ip address with

pix535's outside interface mac address,but have other static ip address no assign a mac, there only 00-00-00-00 display,why?

thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mostiguy@netnum... Sat, 06/07/2003 - 07:17
User Badges:
  • Silver, 250 points or more

If there had been no recent communication to those ip addresses, there may not be an arp entry as it may have timed out. if you ping those static ip addresses, and they are in use, they should appear in the arp table

mhoda Sat, 06/07/2003 - 14:16
User Badges:
  • Silver, 250 points or more

Hi,


This is kind of strange ! With proxy arp on, you should be able to see the mac of outside for all the static translations. I would check to see if there is any address conflictions? Thanks,


Mynul

lprong Sun, 06/08/2003 - 04:35
User Badges:

Hi,thanks everybody,i found my static command config wrong,

now system is ok.

thanks!


Actions

This Discussion