06-06-2003 10:12 PM - edited 03-09-2019 03:35 AM
On the other side of pix 535 outside interface ,the router`s interface ethernet
,with the "show arp "command,i only find three pix 535 static ip address with
pix535's outside interface mac address,but have other static ip address no assign a mac, there only 00-00-00-00 display,why?
thanks!
06-07-2003 07:17 AM
If there had been no recent communication to those ip addresses, there may not be an arp entry as it may have timed out. if you ping those static ip addresses, and they are in use, they should appear in the arp table
06-07-2003 02:16 PM
Hi,
This is kind of strange ! With proxy arp on, you should be able to see the mac of outside for all the static translations. I would check to see if there is any address conflictions? Thanks,
Mynul
06-08-2003 04:35 AM
Hi,thanks everybody,i found my static command config wrong,
now system is ok.
thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide