Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Chassis Serial number

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
lewong Mon, 06/16/2003 - 18:04
User Badges:
  • Cisco Employee,

You are correct.

The Cat 4006 output does list the chassis serial number.

In the case of the 3548.. you want to grab the system serial number not the motherboard serial number.

See below:

cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes

of memory.

Processor board ID FAA03xxxxxx, with hardware revision 0x00

Last reset from power-on

Processor is running Enterprise Edition Software

Cluster command switch capable

Cluster member switch capable

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:30:80:96:30:00

Motherboard assembly number: 73-3904-08

Power supply part number: 34-0851-02

Motherboard serial number: FAAxxxxxxx

Power supply serial number: NONE

Model revision number: A0

Model number: WS-C3524-XL-EN

System serial number: FAA03xxxxxx <---- This one!!

Configuration register is 0xF



gahlberg Tue, 06/17/2003 - 07:27
User Badges:

Is there any way to match (for ex. with a Catalyst 2948) the Serial Number that is on the sticker on the switch with the actual system serial number. For example, if I have a switch off-site and can't see the sticker. How can I go about finding that sticker serial number. As an example, (for one that I know) system serial number = JAB04470CYD; and the sticker serial number = FOX04372931. Is there a database online to be able to retrieve this information.




This Discussion