×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

AAA and PPP authentication

Unanswered Question
Jun 18th, 2003
User Badges:

Greetings,


I would like to set up aaa authentication for ppp authentication only for my dialup connection. Can this just be done with the:


aaa new model

aaa authentication ppp default local


Username modem password modem


Or would require additional aaa commands.


The rest of the dial up config would be something like this:


Router(config)#interface serial 3

Router(config-if)#physical layer async

Router(config-if)#encapsulation ppp

Router(config-if)#dialer in-band

Router(config-if)#dialer-group 1

Router(config-if)#async default routing

Router(config-if)#async mode dedicated

Router(config-if)#peer default ip-address pool Modemips

Router(config-if)#ppp authentication chap


Router(config)#dialer-list 1 protocol ip permit


line 1 16

speed 115200

flowcontrol hardware

modem inout

modem autoconfigure type usr_sportster

autoselect during-login

autoselect ppp


Any help or input would be great,


Thanks,


Dallas


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
sghosh Wed, 06/18/2003 - 07:20
User Badges:

Hi Dallas,


You need the following commands only.


aaa new model

aaa authentication ppp default local


Username modem password modem


The rest of the dial up config would be something like this:


Router(config)#interface serial 3

Router(config-if)#physical layer async

Router(config-if)#encapsulation ppp

Router(config-if)#async default routing

Router(config-if)#async mode dedicated

Router(config-if)#peer default ip-address pool Modemips

Router(config-if)#ppp authentication chap


line 1 16

speed 115200

flowcontrol hardware

modem inout

modem autoconfigure type usr_sportster

autoselect during-login

autoselect ppp



Thanks

Sujit



Actions

This Discussion