06-18-2003 09:01 AM - edited 02-21-2020 10:07 AM
I have configured a VPN using client v3. It is configured so that upon vpn client connection a username and password box is authenticated against a tacacs server. However, this works ok but netbios (drive mapping) then fails. It works fine when not useing the vpn client or when using the vpn client without the authentication ??
06-24-2003 01:01 PM
Hi! Netbios trafffic which is broadcast in nature is not encapsulated by IPSec. Thus, you require a WINS server for mapping drives on a MS network. Also, you could check to see if the client PC is getting correcr WINS and DNS information. (Go to cmd prompt on your client PC and enter ipconfig /all ). You also need to confirm if 'Cisco VPN Client Start Before Login utility' is being used. For detailed information please see http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_tech_note09186a0080194b4a.shtml.
06-25-2003 01:46 AM
Many thanks, this is very useful !
Nicky
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide