06-25-2003 07:55 AM - edited 03-02-2019 08:25 AM
SSA-SSA-SSA> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
2 2 2 Network Analysis Module WS-X6380-NAM no ok
Module 2 mismatch of config and actual type. Ports disabled
Config: 16-port 1000BaseX , Actual: Network Analysis Module
Insert config module type or do a 'clear config 2'
3 3 16 1000BaseX Ethernet WS-X6416-GBIC no ok
4 4 16 1000BaseX Ethernet WS-X6416-GBIC no ok
6 6 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
7 7 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
8 8 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
9 9 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
We relocated NAM from site to another and I reconfigured it. I tried resetting, but still get mis match error.
06-25-2003 09:02 AM
What is the software version running on this NAM and the switch above?
06-30-2003 09:42 AM
Hi Richard,
The slot2 was probably occupied by another linecard or supervisor in the past. Configuration is retained when installing a module in this slot. So do as the message advise you. do a
Regards,
Frank
06-30-2003 11:28 AM
Thanks the second reply fixed my problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide