×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

recording call with 7750 and 3550 switches

Unanswered Question
Jun 26th, 2003
User Badges:

does anyone have experience using the 3550 and allowing recording of calls?

the 3550 doesn't allow bi-directional communication once the span is setup between the agents and the ICD server.

Any ideas would be of great assistance.....

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (4 ratings)
Loading.
RICHARD MESSINGER Mon, 07/07/2003 - 07:43
User Badges:

And since you said that you are running on a 7750, you are out of luck. There is no second NIC on the server blade. You will need to upgrade to a IPCC Express server or use a third-part package, like Eyretel's.

adignan Mon, 07/07/2003 - 16:41
User Badges:
  • Blue, 1500 points or more

Of course but if he is worrying about call recording on the 3550 he probably has an external server...;) But if you have IPCC Express running on an SPE blade you will configure the fastethernet port on the backplane of the 7750 (which does support bi directional communication) so the 3550 will not come into play.

blcase Mon, 08/18/2003 - 09:16
User Badges:

Take a look at Corvero Networks http://www.corvero.com/ You may have better luck with this than using the recording feature in ICD. Also, any call could be recorded, not just agents.

adignan Mon, 08/18/2003 - 12:14
User Badges:
  • Blue, 1500 points or more

I have many sites with 7750's and ICD running on a blade and an external server with Recording and Monitoring working with no problems. No need to spend anymore money. Just configure the FE port on your MRP blade as the SPAN destination port and span the uplink port to your 3550.

Actions

This Discussion