Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
250
Views
5
Helpful
1
Replies

Translation Pattern mapping DID to internal extension

Go to solution
Bill CARTER
Level 5
Level 5

‎07-01-2003 07:32 AM - edited ‎03-13-2019 12:33 AM

Carrier is sending 4 digits. I want DID 0760 to map to internal extension 7300. In the translation pattern do I put the internal ext. in the Called Party Transform Mask ?

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
thusain
Level 4
Level 4

‎07-01-2003 03:21 PM

You can make the translation on the gateway or the CCM. If you have an IOS gateway, you can make a translation rule and apply it to the outbound voip dial peer as such

translation-rule 1

rule 1 ^0760 7300

dial-peer voice 10 voip

translate-outgoing called 1

OR :

On the call manager alternatively you can make a translation patterna nd change the called party number from 0760 to 7300

View solution in original post

1 Reply 1

Go to solution
thusain
Level 4
Level 4

‎07-01-2003 03:21 PM

You can make the translation on the gateway or the CCM. If you have an IOS gateway, you can make a translation rule and apply it to the outbound voip dial peer as such

translation-rule 1

rule 1 ^0760 7300

dial-peer voice 10 voip

translate-outgoing called 1

OR :

On the call manager alternatively you can make a translation patterna nd change the called party number from 0760 to 7300

Customers Also Viewed These Support Documents