×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Access Pix 501 via HTTPS

Unanswered Question
Jul 8th, 2003
User Badges:
  • Bronze, 100 points or more

I am consistantly getting a DNS error when attempting to access my PIX via the https://ipaddress function. I got in yesterday, removed an outside ip from its access into the network and now I cannot get into the utility. I cannot even get past the 1st password prompt when I try to telnet in. I have all of the passwords I setup with TAC last year and none of them work (been trying for 2 days now). Please help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Tue, 07/08/2003 - 15:48
User Badges:

I got in through a telnet seesion now but I have no clue as to how to make changes in here. the help function only confuses me more. can someone please direct me in the best way to modify the pix. the only easy way i see it is through the https way but i still cannot get into it

Hello Craig,


Can you connect to the PIX via the consol port with the apporiate cable and have got PDM running on your PIX ? If you can get onto the PIX via consol port and you have PDM (Pix Device Manager) running then what you'll need to do to access the PDM is -


>http server enable

>http 255.255.255.255 inside


For telnet -


>telnet 255.255.255.255 inside


The above config is from PIX IOS 6.2, make sure you use cmd 'wr m' (write memory) to save your changes.


Let me know how you get on and if you can post you PIX config (please remember to remove ALL real IP's and passwords)


Hope this helps --

Actions

This Discussion