07-09-2003 07:19 AM - edited 03-02-2019 08:44 AM
Hello,
I'm in a trouble.
I've just configured a Cisco 3600 to accept LAPB-TA incoming calls.
My customer is calling, but the 3600 doesn't accept the incoming call.
Here below I copy some row of the debug output:
=== debug output ===
*Mar 1 23:57:42.126: ISDN Se1/0:15: Incoming call id = 0x4, dsl 0
*Mar 1 23:57:42.126: ISDN Se1/0:15: received CALL_INCOMING call_id 0x4
*Mar 1 23:57:42.126: ISDN Se1/0:15: CALL_INCOMING: call type is DATA, bchan = 13
*Mar 1 23:57:42.126: ISDN Se1/0:15: Event: Received a DATA call from 471661782 on B14 at 64 Kb/s
*Mar 1 23:57:42.130: ISDN Se1/0:15: isdn_send_connect(): msg 74, call id 0x4, ces 0 bchan 13, call type DATA
*Mar 1 23:57:42.170 UTC: %LINK-3-UPDOWN: Interface Serial1/0:13, changed state to up
*Mar 1 23:57:42.202: ISDN Se1/0:15: received CALL_PROGRESSing call_id 0x4
*Mar 1 23:57:44.446: LAPB-TA: Autodetect trying to detect LAPB on Se1/0:13
*Mar 1 23:57:44.446: sampled pkt: 34 bytes: 52 49 43 48 49 45 53 54 41 20 43 4F 4E 4E 45 53.. no match
=== debug end ===
I think the problem is in the last line: "no match".
Please, has anyone encountered the same problem?
Thank in advance
Paolo
07-15-2003 11:56 AM
I have not come across this situation. But, I just happened to see this one which seems to have a good deal of information about the topic that you want. Check out if it helps you.
07-16-2003 07:54 AM
Hello,
I haven't access to the document.
Please, could you send it to me?
Thanks in advance
Paolo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide