07-22-2003 09:34 PM - edited 03-10-2019 07:25 AM
I set a switch to use radius server. And I left a backdoor for local. The command as :
set authentication login local enable
set authentication radius enable telnet
But when the radius down, switch still show user/password.When I put username(whatever)/password(login), it failed.
Why?
07-24-2003 02:21 PM
Hello,
What version of code you are running? Please make sure to run 7.5.1 or above for the local user database authentication. Here is the link that explains the details -
http://www.cisco.com/en/US/tech/tk583/tk642/technologies_tech_note09186a0080094ea4.shtml#c
In the link, it shows how to create the local user. Please make sure to do this step. Regards,
Mynul
07-24-2003 06:13 PM
Yes, I have checked the article. But in the STEP B, it configure radius used local as a backdoor, which catos is from 5.1 to 7.5.1.
I just wander how it works at catos before 7.5.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide