Vlans in 2924

Unanswered Question
Jul 23rd, 2003
User Badges:

Hi,


My Config on 2924 switch is like this.


int vlan 4

ip address 192.168.10.1 255.255.255.0

no shut


int vlan 5

ip address 192.168.20.1 255.255.255.0

no shut


int fa0/1

switchport access vlan 4


int fa0/2

switchport access vlan 5


I have servers connected to fa0/1 and fa0/2 having IP 192.168.10.2 and 192.168.20.2 respectively.


Vlan 4 is up and working fine. I am able to telnet into switch with IP 192.168.10.1 Now when I shut vlan 4 and bring up vlan 5 , it comes up, but I m not able to telnet using vlan 5 IP.


Is there a routing problem here?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
deilert Wed, 07/23/2003 - 09:33
User Badges:
  • Silver, 250 points or more

your default gateway is mostlikely in vlan 4 , you can try to add another default route that connects to vlan 5

prafuljaded Wed, 07/23/2003 - 09:48
User Badges:

Thanx for the replies.

I m able to telnet into the switch with vlan 4 as admin no shut. But when I shut vlan 4 and bring up vlan 5 it comes up , vlan 4 goes down , but I m not able to telnet into switch as before.


Thanx in advance

Actions

This Discussion