×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

800 line Access List

Unanswered Question
Jul 25th, 2003
User Badges:

I have a 2620 router and it has 64MB RAM 16MB Flash. Is there a way around the 32kb limitation for the config? The config file that I'm trying to paste is about 641KB and even at compressed it's over the 32KB limit. I also tried to tftp that file and still have a problem.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
deilert Fri, 07/25/2003 - 11:18
User Badges:
  • Silver, 250 points or more

If you tried the service compress config command and it did not work , did you try to tftp it in in a couple of shots , make 3 separate files then tftp them in one at a time .

rl1brosamer Mon, 07/28/2003 - 09:58
User Badges:

Yes I have tried the service compress config and the 800 line access list is still to big to run off of flash. The problem is when we TFTP the access list it will skip lines here and there. When we were pasting the access list via telnet it will spit out a invalid marker error and skip a few lines. There is no way around the 32KB limitation?

rjackson Mon, 07/28/2003 - 12:05
User Badges:
  • Bronze, 100 points or more

Check on the boot config url command. Not sure it works in the 2600.


The real issue sounds like the size of the list. It will really slow the 2600 down. Seems like a list that big could be summarized somehow to make it smaller.

Actions

This Discussion