×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

HSRP Troubleshooting

Unanswered Question
Jul 29th, 2003
User Badges:

I'm presently implementing HRSP btw 2 cat 6509 (each having 1-sepervisor engine with MSFC2) switches with inter-vlan routing btw 10 vlans. However, the hosts on the vlans get frozen when the primary switch fail-over to the second switch.


What do you think is reponsible and how could i resolve this problem?.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
deilert Tue, 07/29/2003 - 08:56
User Badges:
  • Silver, 250 points or more

DO you have port fast enabled on the switch ports that are connected to the clients off the server ?


By enabling this the ports directly connected will not perform spanning tree calculation , the takes approx 40 seconds , You only want to configure this on ports attached to PC's or server , never ports attached to other switches or routers.

Actions

This Discussion