08-12-2003 01:34 AM - edited 03-02-2019 09:31 AM
Hi
I am having a problem with a 1601 Router. The line protocol goes up and down. I installed another WIC 1T to test if the problem was on the Existing WIC but still have the same problem with the new one.
The IOS version running is 12.0 (3)T . Also when i use another Router on the same Link, it works fine, this means the link is ok, the problem must be with the router.
Anyone knows any known problems with 1601s with IOS 12.0 (3) T ? Help highly appreciated
regards
KM
08-12-2003 01:51 AM
Hi,
Looks like a software problem, what version is running on the "good" router ?
08-12-2003 03:01 AM
Both router have the same version
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-Y-M), Version 12.0(12), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 10-Jul-00 19:59 by htseng
Image text-base: 0x02005000, data-base: 0x0245E484
ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T, RELEASE SOFTWARE (fc1)
MTNTEST1 uptime is 17 hours, 39 minutes
System restarted by power-on
System image file is "flash:c1600-y-mz.120-12"
cisco 1601 (68360) processor (revision C) with 6144K/2048K bytes of memory.
Processor board ID 24815082, with hardware revision 00000005
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
System/IO memory with parity disabled
8192K bytes of DRAM onboard
System running from RAM
7K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read/Write)
Configuration register is 0x2102
KM
08-13-2003 06:29 AM
can you paste in your config
08-13-2003 06:39 AM
What does the debug int serial0/0 output show?
Make sure if you're logged in through telent you use the term mon command and enable console logging.
conf t
console logging
ctrl+z
term mon
debug int serial 0/0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide