Determining which dram simm slots are occupied in a 3640

Unanswered Question

I need to determine which simm slots are occupied in a 3640 remotely without opening the case. Is there any command for this? If it's show tech, which part? I can see the total installed amount, but can't determine if all 4 slots are occupied or only one or two. All routers have 64MB dram.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
deilert Thu, 08/21/2003 - 09:51

in your sh ver there will be a line like this

DRAM configuration is 64 bits wide with parity disabled.

It depends on if you have 32 or 64 bit wide memory .

If you have 64 bit then the options for 64MB of RAM are

4 X 16

2 X 32

If you have 32 bit wide the options are

4 X 16

that is the best it can be narrowed down without opening the box


This Discussion