×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

6500 sup720 pwd mgmt LED status appear orange

Unanswered Question
Aug 24th, 2003
User Badges:

we have two sup720,one is active another is standby. We found all LEDs in active mode are shown as green, but in standby mode the power management LED is shown as orange. Is that the correct status or not. If it is not correct status,what should I do?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
victorchen Mon, 08/25/2003 - 17:10
User Badges:

Console> (enable) sh mod

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 48 10/100BaseTX Ethernet WS-X6148-RJ45V yes ok

3 3 16 1000BaseX Ethernet WS-X6516A-GBIC no ok

4 4 16 1000BaseX Ethernet WS-X6516A-GBIC no ok

7 7 2 1000BaseX Supervisor WS-SUP720-BASE yes ok

15 7 1 Multilayer Switch Feature WS-SUP720 no ok

8 8 2 1000BaseX Supervisor WS-SUP720-BASE yes standby

16 8 1 Multilayer Switch Feature WS-SUP720 no standby


Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAL0721E05R

3 SAL0720DAKS

4 SAL0720DBAL

7 SAD072302ZB

15 SAD072303Y1

8 SAD072301DH

16 SAD072303Y1


Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-0d-28-b7-a5-70 to 00-0d-28-b7-a5-9f 1.3 5.4(2) 8.1(1)

3 00-0d-28-48-44-40 to 00-0d-28-48-44-4f 1.0 7.2(1) 8.1(1)

4 00-0d-28-48-06-f0 to 00-0d-28-48-06-ff 1.0 7.2(1) 8.1(1)

7 00-0c-ce-64-0a-d2 to 00-0c-ce-64-0a-d3 2.1 7.7(1) 8.1(1)

00-0c-ce-64-0a-d0 to 00-0c-ce-64-0a-d3

00-07-b3-0e-94-00 to 00-07-b3-0e-94-3f

15 00-07-b3-0e-94-3c to 00-07-b3-0e-94-3d 1.2 12.2(14)SX 12.2(14)SX2

8 00-0c-ce-64-0a-de to 00-0c-ce-64-0a-df 2.1 7.7(1) 8.1(1)

00-0c-ce-64-0a-dc to 00-0c-ce-64-0a-df

16 00-07-b3-0e-94-3c to 00-07-b3-0e-94-3d 1.2 12.2(14)SX 12.2(14)SX2


Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw

--- ----------------------- ------------------- ----------- ------ ------

1 Inline Power Module WS-F6K-VPWR 2.0 0.0(0)

7 L3 Switching Engine III WS-F6K-PFC3A SAD07220149 1.1

8 L3 Switching Engine III WS-F6K-PFC3A SAD072300PH 1.1


Console> (enable) sh environment

Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)

PS1: . PS2: N PS1 Fan: . PS2 Fan: N

Chassis-Ser-EEPROM: . Fan1: .

Clock(A/B): A Clock A: . Clock B: .

VTT1: . VTT2: . VTT3: .


Console> (enable) sh environment all

Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)

PS1: . PS2: N PS1 Fan: . PS2 Fan: N

Chassis-Ser-EEPROM: . Fan1: .

Clock(A/B): A Clock A: . Clock B: .

VTT1: . VTT2: . VTT3: .


Intake Exhaust Device 1 Device 2

Slot Temperature Temperature Temperature Temperature

--------------- --------------- --------------- --------------- ---------------

1 28C(50C,65C) 29C(60C,75C) 27C 28C


3 26C(50C,65C) 37C(65C,80C) N/A N/A


4 27C(50C,65C) 37C(65C,80C) N/A N/A


7 27C(45C,60C) 34C(50C,65C) 34C(60C,75C) 32C(45C,60C)


8 27C(45C,60C) 33C(50C,65C) 33C(60C,75C) 35C(45C,60C)


7 (Switch-Eng) 27C(50C,65C) 41C(50C,65C) N/A N/A


8 (Switch-Eng) 27C(50C,65C) 42C(50C,65C) N/A N/A


7 (MSFC) N/A N/A N/A N/A


8 (MSFC) N/A N/A N/A N/A



Chassis Modules

---------------------

VTT1: 32C(85C,100C)

VTT2: 55C(85C,100C)

VTT3: 34C(85C,100C)


PS1 Capacity: 3830.40 Watts (91.20 Amps @42V)

PS2 Capacity: none

PS Configuration : PS1 and PS2 in Redundant Configuration.

Total Power Available: 3830.40 Watts (91.20 Amps @42V)

Total Power Available for Line Card Usage: 3764.04 Watts (89.62 Amps @42V)

Total Power Drawn From the System: 1413.30 Watts (33.65 Amps @42V)

Total Power Drawn by the Chassis: 66.36 Watts ( 1.58 Amps @42V)

Total Inline Power Drawn From the System: 0.000 ( 0.000 Amps @42V)

Total Power Reserved as localpool for modules: 14.28 Watts ( 0.34 Amps @42V)

Remaining Power in the System: 2417.10 Watts (57.55 Amps @42V)

Configured Default Inline Power allocation per port: 15.400 Watts (0.36 Amps @42

V)



Fan tray(s) power Requirement/Usage :


Fan Model PowerRequested PowerAllocated

Watts A @42V Watts A @42V

---- ------------------- ------- ------ ------- ------

1 WS-C6513-CL 298.20 7.10 298.20 7.10


Slot power Requirement/Usage :


Slot Card Type PowerRequested PowerAllocated CardStatus

Watts A @42V Watts A @42V

---- ------------------- ------- ------ ------- ------ ----------

1 WS-X6148-RJ45V 100.38 2.39 100.38 2.39 ok

3 WS-X6516A-GBIC 152.04 3.62 152.04 3.62 ok

4 WS-X6516A-GBIC 152.04 3.62 152.04 3.62 ok

7 WS-SUP720-BASE 315.00 7.50 315.00 7.50 ok

8 WS-SUP720-BASE 315.00 7.50 315.00 7.50 standby


Slot Inline Power Requirement/Usage :


Slot CardType Total Allocated Max H/W Supported Max H/W Supported

To Module (Watts) Per Module (Watts) Per Port (Watts)

---- ------------------- ----------------- ------------------ -----------------

1 WS-X6148-RJ45V 0.000 399.84 7.000




Chassis per slot cooling capacity : 83 cfm



Fan tray(s) cooling capacity :


Fan Model Ver Cooling Ambient FanStatus

capacity temp

---- ------------------- --- -------- ------- ---------

1 WS-C6513-CL 2 1090 cfm - ok


Slot cooling requirement :


Slot CardType Cooling

---- ------------------- -------

1 WS-X6148-RJ45V 30 cfm

3 WS-X6516A-GBIC 30 cfm

4 WS-X6516A-GBIC 30 cfm

7 WS-SUP720-BASE 35 cfm

8 WS-SUP720-BASE 30 cfm



Chassis connector rating : 693.00 Watts (16.50 Amps @42V)


Slot connector rating :


Slot CardType ConnectorRating

Watts A @42V

---- ------------------- -------- ------

1 WS-X6148-RJ45V 693.00 16.50

3 WS-X6516A-GBIC 693.00 16.50

4 WS-X6516A-GBIC 693.00 16.50

7 WS-SUP720-BASE 693.00 16.50

8 WS-SUP720-BASE 693.00 16.50


Console> (enable)

victorchen Tue, 09/02/2003 - 07:47
User Badges:

give me a hand please.... who can answer this question..

Actions

This Discussion