Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Errors from DBWalker

Unanswered Question
Aug 24th, 2003
User Badges:


I ran the DBWalker ver. 3.059 on the Unity 3.15 and some errors found. Luckily, No user had problem to access Unity so far. Any idea?

Errors are shown below.



Display Name=a 7296

1527:(error) smtpAddress value for subscriber is NULL. This usually means the mail server has not generated an SMTP address for this user which can cause problems.


Display Name=Example Subscriber

1203:(error) The primary call handler for this subscriber has it's AdministratorObjectID value set to point to a different subscriber.

You can fix this in DOHPropTest by copying the ObjectID of the subscriber into the AVP_ADMINISTRATOR_OBJECT_ID value for the primary call handler. This can also, however, mean a there is a 'cross linked' call handler problem where a single primary call handler is being 'shared' by more than one subscriber.


Thx a lot


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
steven.brummer@... Mon, 08/25/2003 - 04:03
User Badges:

For your first error:

I would suggest looking in for any Recipient Update Service errors for starters. You will need to turn up the diagnostic logging of the services to get any real information from them.

For your second error:

This was normal from what I was told. The ESubscriber (Example Subscriber) by default has the same AdministratorObjectID as the EAdmin subscriber by default.

Hope this helps, (someone correct me if I'm wrong)


This Discussion