×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RME Software Distribution - The Failed job that just won't stop

Unanswered Question
Aug 25th, 2003
User Badges:

I have a software distribution job that a user created for a single device that failed because of an invalid community string. The job status is listed as "Error". The original job specifications were:


Device reboot option Never

Insert New Boot Commands Yes

Stop on Error No

Backup Running Image No


The problem is that CiscoWorks has been attempting to run the job once a day, every day since the job originally failed. There is no cancel button for this job in the job details report. Removing the job, from job the details report is ineffective - it just reappears the next day. Is there any way to prevent CiscoWorks from running this job again.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Mon, 09/01/2003 - 13:15
User Badges:
  • Silver, 250 points or more

You can kill/delete the job by the following procedure. Navigate through "Jobs option" Resource Manager Essentials-> Software Management-> Job Management -> Browse Jobs. Select the Job Status report,and click on the job that has to be removed.

This opens up a new window and then click on the remove tab to remove the job in question.

Actions

This Discussion